HTML has links - PDF has Authentication
296-807-15045  <<  296-807-15050 >>   296-807-15055

PDFWAC 296-807-15050

Inspect and maintain tools properly.

(1) You must make sure any tool that is not in proper working condition is:
(a) Immediately removed from service;
(b) Tagged;
(c) Properly repaired as specified in the manufacturer's instructions before being used again.
(2) You must regularly service the tool and inspect it for worn or damaged parts at intervals recommended by the tool manufacturer.
(3) You must replace worn or damaged parts before the tool is used. This must be done:
(a) By a qualified person;
(b) Using only parts supplied by the tool manufacturer.
(4) You must keep a written record of inspection dates.
[Statutory Authority: RCW 49.17.010, 49.17.040, 49.17.050. WSR 15-23-086, § 296-807-15050, filed 11/17/15, effective 12/18/15. Statutory Authority: RCW 49.17.010, [49.17].040, [49.17].050, and [49.17].060. WSR 03-09-009, § 296-807-15050, filed 4/4/03, effective 8/1/03.]
Site Contents
Selected content listed in alphabetical order under each group