PDFWAC 16-675-055
What fees are charged when the inspecting and testing of a weighing or measuring device is specifically requested by the device's owner?
The fees in the following table apply to inspecting and testing weighing or measuring devices when the inspection or test is:
(1) Specifically requested by the device's owner or their representative; or
(2) Performed on devices used by an agency or institution that receives money from the legislature or the federal government.
Weighing and Measuring Device | Inspection and/or Testing Fee |
Small scales "zero to 400 pounds capacity" | $16.80 per scale |
Intermediate scales "400 pounds to 5,000 pounds capacity" | $56.10 per scale |
Large scales "over 5,000 pounds capacity" | $140.30 per scale |
Large scales with supplemental devices | $168.40 per scale |
Railroad track scales | $1,123.00 per scale |
Liquid fuel meters with flows of less than 20 gallons per minute | $16.80 per meter |
Liquid fuel meters with flows of at least 20 but not more than 150 gallons per minute | $56.10 per meter |
Fuel meters with flows over 150 gallons per minute | $168.40 per meter |
Liquid petroleum gas meters with one-inch diameter or smaller dispensers | $56.10 per meter |
Liquid petroleum gas meters with greater than one-inch diameter dispensers | $168.40 per meter |
Inspection services not covered by the above special inspection fees | $37.80 per hour for labor and travel time (minimum one hour charge) |