PDFWAC 296-874-30028
Take precautions while welding.
You must do the following to protect employees while welding on suspended scaffolds:
(1) Use an insulated thimble to attach each suspension wire rope to its hanging support, such as a cornice hook or outrigger;
(2) Insulate excess suspension wire rope and any additional independent lines to prevent grounding;
(3) Cover the wire suspension rope with insulating material that extends at least four feet (1.2 m) above the hoist;
(4) Make sure any tail line that extends below the hoist is:
(a) Insulated to prevent contact with the platform; and
(b) Guided or retained so it does not become grounded.
(5) Cover each hoist with an insulated protective cover;
(6) Connect the scaffold to the structure using a grounding conductor that:
(a) Is at least the size of the welding process work lead; and
(b) Is not in series with the welding process or the work piece.
(7) Shut off the welding machine if the scaffold grounding lead becomes disconnected;
(8) Make sure an active welding rod or an uninsulated welding lead is not allowed to contact the:
(a) Scaffold; or
(b) Scaffold suspension system.