WAC 296-807-15035:

296-807-15030 << 296-807-15035 >> 296-807-15040

PDFWAC 296-807-15035

Make sure the tool is appropriate to the job.

(1) You must use the lowest velocity class of tool and load that will properly set the fastener.

(2) You must use the proper shield, fixture, adaptor, or accessory that is:

(a) Suitable for the job;

(b) Recommended and supplied by the manufacturer.

[Statutory Authority: RCW 49.17.010, 49.17.040, 49.17.050. WSR 15-23-086, § 296-807-15035, filed 11/17/15, effective 12/18/15. Statutory Authority: RCW 49.17.010, [49.17].040, [49.17].050, and [49.17].060. WSR 03-09-009, § 296-807-15035, filed 4/4/03, effective 8/1/03.]