HTML has links - PDF has Authentication
296-307-28034  <<  296-307-28036 >>   296-307-28038

PDFWAC 296-307-28036

Guarding collars and couplings.

(1) All revolving collars, including split collars, must be cylindrical.
(2) Screws or bolts used in collars must not project beyond the largest periphery of the collar.
(3) Shaft couplings must be constructed to prevent hazard from bolts, nuts, set screws, or revolving surfaces. Bolts, nuts, and set screws are permitted where they are covered with safety sleeves or where they are used parallel with the shafting and are countersunk or where they do not extend beyond the flange of the coupling.
[Statutory Authority: RCW 49.17.010, 49.17.040, 49.17.050, and 49.17.060. WSR 20-21-091, § 296-307-28036, filed 10/20/20, effective 11/20/20. WSR 97-09-013, recodified as § 296-307-28036, filed 4/7/97, effective 4/7/97. Statutory Authority: RCW 49.17.040, [49.17.]050 and [49.17.]060. WSR 96-22-048, § 296-306A-28036, filed 10/31/96, effective 12/1/96.]
Site Contents
Selected content listed in alphabetical order under each group