CONVERSION VENDOR UNITS AND MEDICAL UNITS
WAC Sections
HTMLPDF | 296-150V-0010 | Authority, purpose, and scope. |
HTMLPDF | 296-150V-0020 | What definitions apply to this chapter? |
HTMLPDF | 296-150V-0030 | How is this chapter enforced? |
HTMLPDF | 296-150V-0040 | Is manufacturing information kept confidential? |
HTMLPDF | 296-150V-0050 | Can you prohibit the sale or lease of a conversion vendor unit or medical unit? |
HTMLPDF | 296-150V-0060 | Who handles consumer complaints about conversion vendor units or medical units? |
HTMLPDF | 296-150V-0070 | Do you have reciprocal agreements with other states to inspect conversion vendor units and medical units? |
HTMLPDF | 296-150V-0080 | Do you allow a local enforcement agency to inspect conversion vendor units and medical units at the manufacturing location? |
HTMLPDF | 296-150V-0100 | What happens if I disagree with your decision regarding my compliance with this chapter? |
HTMLPDF | 296-150V-0110 | Do you have an advisory board to address conversion vendor unit and medical unit issues? |
HTMLPDF | 296-150V-0120 | Where can I obtain technical assistance regarding conversion vendor units or medical units? |
HTMLPDF | 296-150V-0140 | Do you allow the use of alternate materials, design, or method of construction? |
INSIGNIA | ||
HTMLPDF | 296-150V-0200 | Who must obtain conversion vendor unit or medical unit insignia? |
HTMLPDF | 296-150V-0210 | What are the insignia requirements? |
HTMLPDF | 296-150V-0220 | How do I obtain insignia information and the required forms? |
HTMLPDF | 296-150V-0230 | What are the insignia application requirements? |
HTMLPDF | 296-150V-0240 | What documentation do you need to perform an alteration inspection? |
HTMLPDF | 296-150V-0250 | How do I replace lost or damaged insignia? |
DESIGN PLAN | ||
HTMLPDF | 296-150V-0300 | When is design-plan approval required? |
HTMLPDF | 296-150V-0310 | Who can approve design plans? |
DESIGN-PLAN APPROVAL BY THE DEPARTMENT | ||
HTMLPDF | 296-150V-0320 | What must I provide with my request for conversion vendor unit or medical unit design-plan approval by the department? |
HTMLPDF | 296-150V-0340 | When is an engineering analysis or structural load test for design plans required? |
HTMLPDF | 296-150V-0350 | What must test procedures and results for design plans include? |
HTMLPDF | 296-150V-0380 | What happens if you approve my design plan? |
HTMLPDF | 296-150V-0390 | If my design plan is not approved, how much time do I have to submit a corrected design plan? |
HTMLPDF | 296-150V-0400 | What happens after my design plan is approved? |
HTMLPDF | 296-150V-0410 | When does my design plan expire? |
HTMLPDF | 296-150V-0415 | Who approves addendums to design plans? |
DESIGN-PLAN APPROVAL BY A LICENSED PROFESSIONAL OR FIRM | ||
HTMLPDF | 296-150V-0420 | Who can be authorized to approve design plans? |
HTMLPDF | 296-150V-0430 | What information must a professional or firm provide to be authorized to approve design plans? |
HTMLPDF | 296-150V-0440 | How will I know whether I am authorized to approve design plans? |
HTMLPDF | 296-150V-0450 | How long is a licensed professional or firms authorization effective? |
HTMLPDF | 296-150V-0460 | What information must a manufacturer send to the department when a professional or firm does the design-plan approval? |
HTMLPDF | 296-150V-0470 | What happens after we receive the professional or firm approved design plan and information? |
HTMLPDF | 296-150V-0480 | Do you have a list of professionals or firms that are authorized to approve design plans? |
HTMLPDF | 296-150V-0490 | Who approves addendums to design plans approved by a professional or firm? |
HTMLPDF | 296-150V-0495 | Contractor deposit accounts. |
INSPECTIONS PRIOR TO ISSUANCE OF AN INSIGNIA | ||
HTMLPDF | 296-150V-0500 | When is an inspection required? |
HTMLPDF | 296-150V-0510 | How do I request an inspection? |
HTMLPDF | 296-150V-0520 | What happens if my conversion vendor unit or medical unit passes inspection? |
HTMLPDF | 296-150V-0530 | Am I charged if I request an inspection but I am not prepared? |
HTMLPDF | 296-150V-0540 | Who inspects a conversion vendor unit or medical unit installation at the building site or event location? |
HTMLPDF | 296-150V-0550 | Do you allow a conversion vendor unit or medical unit to be completed at the installation site? |
HTMLPDF | 296-150V-0560 | What happens if I receive a notice of noncompliance after inspection of the alteration to my conversion vendor unit or medical unit? |
USED CONVERSION VENDOR UNITS OR MEDICAL UNITS WITHOUT AN INSIGNIA | ||
HTMLPDF | 296-150V-0580 | Must I obtain an insignia for used conversion vendor units or medical units? |
HTMLPDF | 296-150V-0590 | How do I obtain insignia for used conversion vendor units or medical units? |
MANUFACTURER'S NOTICE TO THE DEPARTMENT | ||
HTMLPDF | 296-150V-0700 | Must manufacturers of conversion vendor units and medical units notify you if they manufacture at more than one location? |
HTMLPDF | 296-150V-0710 | Must manufacturers of conversion vendor units and medical units notify you of a change in business name or address? |
HTMLPDF | 296-150V-0720 | Must manufacturers of conversion vendor units and medical units notify you of a change in business ownership? |
CONVERSION VENDOR UNIT AND MEDICAL UNIT CONSTRUCTION CODE GENERAL AND STRUCTURAL | ||
HTMLPDF | 296-150V-0800 | What codes apply to conversion vendor units and medical units? |
HTMLPDF | 296-150V-0930 | When are structural load tests or structural calculations required? |
Construction and Materials | ||
HTMLPDF | 296-150V-0950 | What requirements apply to roof coverings? |
HTMLPDF | 296-150V-1040 | Are there floor requirements? |
HTMLPDF | 296-150V-1070 | What requirements apply to floor closure material? |
HTMLPDF | 296-150V-1090 | What are the standards for equipment and installations? |
HTMLPDF | 296-150V-1100 | What are the flame-spread limitations? |
HTMLPDF | 296-150V-1110 | Combustible limitations. |
HTMLPDF | 296-150V-1120 | What are the standards for wall and cabinet protection? |
HTMLPDF | 296-150V-1170 | What are the light and ventilation requirements? |
HTMLPDF | 296-150V-1180 | What requirements apply to conversion vendor unit exits? |
HTMLPDF | 296-150V-1185 | What exit door requirements apply to self-propelled medical unit exits? |
HTMLPDF | 296-150V-1190 | Interior privacy locks. |
HTMLPDF | 296-150V-1303 | How must storage batteries be installed in a conversion vendor unit or medical unit? |
Mechanical | ||
HTMLPDF | 296-150V-1330 | What are the mechanical requirements for a conversion vendor unit or medical unit? |
HTMLPDF | 296-150V-1350 | What are the LPG system enclosure and mounting requirements for a conversion vendor unit or medical unit? |
HTMLPDF | 296-150V-1360 | What are the fuel gas piping design requirements for a conversion vendor unit or medical unit? |
HTMLPDF | 296-150V-1380 | Can gas tubing be concealed in a conversion vendor unit or medical unit? |
HTMLPDF | 296-150V-1390 | What are the pipe-joint compound requirements for gas piping in a conversion vendor unit or medical unit? |
HTMLPDF | 296-150V-1400 | What are the gas piping hanger and support requirements for a conversion vendor unit or medical unit? |
HTMLPDF | 296-150V-1410 | What are the electrical bonding requirements for gas piping in a conversion vendor unit or medical unit? |
HTMLPDF | 296-150V-1420 | How are gas supply connections in a conversion vendor unit or medical unit identified? |
HTMLPDF | 296-150V-1430 | What requirements apply to gas piping system openings? |
HTMLPDF | 296-150V-1440 | Are gas piping shut-off valves required in a conversion vendor unit or medical unit? |
HTMLPDF | 296-150V-1450 | What requirements apply to testing for gas piping leaks before conversion vendor unit or medical unit appliances are connected? |
HTMLPDF | 296-150V-1460 | What requirements apply to testing for gas piping leaks after conversion vendor unit or medical unit appliances are connected? |
HTMLPDF | 296-150V-1470 | What are the requirements for appliance installations? |
Plumbing | ||
HTMLPDF | 296-150V-1530 | What general plumbing requirements apply? |
HTMLPDF | 296-150V-1540 | What are the plumbing definitions? |
HTMLPDF | 296-150V-1550 | What requirements apply to drain outlets? |
HTMLPDF | 296-150V-1560 | What is the minimum clearance for drain outlets? |
HTMLPDF | 296-150V-1570 | What requirements apply to water-supply connections? |
HTMLPDF | 296-150V-1580 | What requirements apply to water heater relief valves and safety devices? |
HTMLPDF | 296-150V-1590 | What requirements apply to waste holding tanks for conversion vendor units? |
HTMLPDF | 296-150V-1600 | What are the requirements associated with medical and conversion vending units that have been manufactured and used outside the state according to RCW 43.22.380? |
CONVERSION VENDOR UNIT AND MEDICAL UNIT FEES | ||
HTMLPDF | 296-150V-3000 | Conversion vendor units and medical units—Fees. |