(1) The activities conducted by the applicant that require it to obtain a permit, and if applying under a general permit, the name of the permit.

(2) Name, mailing address, and location of the facility for which the application is submitted.

(3) The operator's name, address, telephone number, ownership status, and status as federal, state, private, public, or other entity.

(4) Whether or not the facility or any associated facilities or land applications sites are located on tribal or federal lands.

(5) A listing of other relevant environmental permits, and all permits or construction approvals received or applied for under any of the following programs:

(a) Hazardous waste management program under the Resource Conservation and Recovery Act.

(b) Underground injection control program under the Safe Drinking Water Act.

(c) National pollutant discharge elimination system program under the Clean Water Act.

(d) Prevention of significant deterioration program under the Clean Air Act.

(e) Nonattainment program under the Clean Air Act.

(f) National emission standards for hazardous pollutants preconstruction approval under the Clean Air Act.

(g) Ocean dumping permits under the Marine Protection, Research, and Sanctuaries Act.

(h) Dredge or fill permits under section 404 of the Clean Water Act.

(6) A map extending one mile (1.6 kilometers) beyond the property boundaries of the facility, showing the location and means of access to the facility, and additional maps if necessary, showing the same for any associated treatment or storage facilities.

(7) Any biosolids monitoring data the applicant has for the last two years, including for land application sites any available soil, or surface or groundwater monitoring data, with a description of the sampling locations, and for wells the approximate depth to groundwater.

(8) A description of the applicant's biosolids use and disposal practices including, where applicable, the location of any sites where the applicant transfers biosolids for treatment or sewage sludge for disposal, as well as the name of the applicator or other contractor who applies the biosolids to land if different from the applicant.

(9) Land application plans, as required under WAC 173-308-310.

(10) The amount of biosolids produced and the amount of biosolids applied to the land during the previous year, and estimated to be produced or applied to the land on an annual basis during the life of the permit.

(11) Any information required to determine the appropriate standards for permitting under this chapter, and any other information the department may request and reasonably require to assess biosolids use or sewage sludge disposal practices, to determine whether or not to issue a permit, or to ascertain appropriate permit requirements under this chapter.