FACTORY-BUILT HOUSING AND COMMERCIAL STRUCTURES
WAC Sections
| HTMLPDF | 296-150F-0010 | Authority, purpose, and scope. |
| HTMLPDF | 296-150F-0020 | What definitions apply to this chapter? |
| HTMLPDF | 296-150F-0030 | How is this chapter enforced? |
| HTMLPDF | 296-150F-0040 | Will you keep my manufacturing information confidential? |
| HTMLPDF | 296-150F-0050 | Can you prohibit the installation of factory-built housing and commercial structures? |
| HTMLPDF | 296-150F-0070 | Do you have reciprocal agreements with other states to inspect factory-built housing and commercial structures, and components? |
| HTMLPDF | 296-150F-0080 | Do you allow a local enforcement agency to inspect factory-built housing, commercial structures, and components at the manufacturing location? |
| HTMLPDF | 296-150F-0090 | What are the requirements for certified plumbers and electricians? |
| HTMLPDF | 296-150F-0100 | What happens if I disagree with your decision regarding my compliance with this chapter? |
| HTMLPDF | 296-150F-0110 | Do you have an advisory board to address factory-built housing and commercial structure issues? |
| HTMLPDF | 296-150F-0120 | Where can I obtain technical assistance regarding factory-built housing and commercial structures? |
| HTMLPDF | 296-150F-0130 | How do I register a complaint? |
| HTMLPDF | 296-150F-0140 | Do you allow the use of alternate materials, alternate design and method of construction? |
INSIGNIA | ||
| HTMLPDF | 296-150F-0200 | Who must purchase factory-built housing and commercial structure insignia? |
| HTMLPDF | 296-150F-0210 | What are the insignia requirements? |
| HTMLPDF | 296-150F-0220 | How do I obtain insignia information and the required forms? |
| HTMLPDF | 296-150F-0230 | What are the insignia application requirements? |
| HTMLPDF | 296-150F-0250 | How do I replace lost or damaged insignia? |
DESIGN PLAN | ||
| HTMLPDF | 296-150F-0300 | When is design plan approval required? |
| HTMLPDF | 296-150F-0310 | Who can approve design plans? |
DESIGN-PLAN APPROVAL BY THE DEPARTMENT | ||
| HTMLPDF | 296-150F-0320 | What must I provide with my request for design-plan approval by the department? |
| HTMLPDF | 296-150F-0325 | What are the requirements for temporary built structures? |
| HTMLPDF | 296-150F-0340 | What must an engineering analysis for design plans include? |
| HTMLPDF | 296-150F-0350 | What must the test procedures and results for design plans include? |
| HTMLPDF | 296-150F-0380 | What happens if you approve my design plan? |
| HTMLPDF | 296-150F-0390 | If my design plan is not approved, how much time do I have to submit a corrected design plan? |
| HTMLPDF | 296-150F-0400 | What happens after my design plan is approved? |
| HTMLPDF | 296-150F-0410 | When does my design plan expire? |
| HTMLPDF | 296-150F-0415 | Who approves addendums to design plans approved by the department? |
DESIGN-PLAN APPROVAL BY A LICENSED PROFESSIONAL OR FIRM | ||
| HTMLPDF | 296-150F-0420 | Who can be authorized to approve design plans? |
| HTMLPDF | 296-150F-0430 | What information must a professional or firm provide to be authorized to approve design plans? |
| HTMLPDF | 296-150F-0440 | How will I know whether I am authorized to approve design plans? |
| HTMLPDF | 296-150F-0450 | How long is a licensed professional or firms authorization effective? |
| HTMLPDF | 296-150F-0460 | What information must a manufacturer send to the department when a professional or firm does the design plan approval? |
| HTMLPDF | 296-150F-0470 | What happens after we receive the professional or firm approved design plan and information? |
| HTMLPDF | 296-150F-0480 | Do you have a list of professionals or firms that are authorized to approve design plans? |
| HTMLPDF | 296-150F-0490 | Who approves addendums to design plans approved by a professional or firm? |
| HTMLPDF | 296-150F-0495 | Contractor deposit accounts. |
INSPECTIONS PRIOR TO ISSUANCE OF AN INSIGNIA | ||
| HTMLPDF | 296-150F-0500 | When is an inspection required? |
| HTMLPDF | 296-150F-0510 | How do I request an inspection? |
| HTMLPDF | 296-150F-0520 | What happens if my factory-built house or commercial structure passes inspection? |
| HTMLPDF | 296-150F-0530 | Am I charged if I request an inspection but I am not prepared? |
| HTMLPDF | 296-150F-0540 | Who inspects factory-built housing and commercial structures for installation at the building site? |
| HTMLPDF | 296-150F-0550 | Do you notify the local enforcement agency after your final inspection of factory-built structures at a manufacturing location? |
USED FACTORY-BUILT STRUCTURES WITHOUT AN INSIGNIA | ||
| HTMLPDF | 296-150F-0580 | Must I obtain an insignia for used factory-built structures? |
| HTMLPDF | 296-150F-0590 | How do I obtain insignia for used factory-built structures? |
CODES FOR FACTORY-BUILT HOUSING, COMMERCIAL STRUCTURES, AND COMPONENTS | ||
| HTMLPDF | 296-150F-0600 | What manufacturing codes apply to factory-built housing and commercial structures? |
| HTMLPDF | 296-150F-0605 | May the required toilet facilities be located in an adjacent building? |
| HTMLPDF | 296-150F-0610 | Do you require the exit doors to be one-half the diagonal distance apart if each area served has its own exit door? |
| HTMLPDF | 296-150F-0620 | Does the department require a water system expansion tank be installed? |
| HTMLPDF | 296-150F-0625 | Are there any special requirements for portable school classrooms? |
| HTMLPDF | 296-150F-0630 | When HVAC equipment is supplied with more than one CFM rating, which rating do I use? |
MANUFACTURER'S NOTICE TO THE DEPARTMENT | ||
| HTMLPDF | 296-150F-0700 | Must manufacturers of factory-built housing and commercial structures notify you if they manufacture at more than one location? |
| HTMLPDF | 296-150F-0710 | Must manufacturers of factory-built housing and commercial structures notify you of a change in business name or address? |
| HTMLPDF | 296-150F-0720 | Must manufacturers of factory-built housing and commercial structures notify you of a change in business ownership? |
FACTORY-BUILT HOUSING AND COMMERCIAL STRUCTURE FEES | ||
| HTMLPDF | 296-150F-3000 | Factory-built housing and commercial structure fees. |
DISPOSITION OF SECTIONS FORMERLY CODIFIED IN THIS TITLE
| 296-150F-0615 | May the electrical disconnect required for mechanical equipment be inside of or mounted on the equipment? [Statutory Authority: RCW 43.22.340 and 43.22.480. WSR 99-13-010, ยง 296-150F-0615, filed 6/4/99, effective 7/5/99.] Repealed by WSR 05-01-102, filed 12/14/04, effective 2/1/05. Statutory Authority: Chapter 43.22 RCW and 2003 c 291. |