HTML has links - PDF has Authentication
296-806-44504  <<  296-806-450 >>   296-806-45002

PDFWAC 296-806-450


In addition to the requirements in this section, you need to refer to the following sections of this chapter in order to fully protect your employees from machine hazards:
Requirements for all machines, WAC 296-806-200 and 296-806-300.
This section applies to the hazards associated with metal and woodworking lathes.
Your responsibility:
To protect employees from hazards associated with metal and woodworking lathes.
You must meet the requirements…
in this section:
Provide shields or guards on metal lathes for chip or coolant hazards
Safeguard work-holding devices (chucks)
Follow these requirements for chip control and handling
Safeguard power-clamping devices
Restrain extended workpieces on horizontal lathes
[Statutory Authority: RCW 49.17.010, 49.17.040, 49.17.050, 49.17.060. WSR 15-24-102, § 296-806-450, filed 12/1/15, effective 1/5/16; WSR 04-14-028, § 296-806-450, filed 6/29/04, effective 1/1/05.]
Site Contents
Selected content listed in alphabetical order under each group