HTML has links - PDF has Authentication
296-806-40516  <<  296-806-40518 >>   296-806-40520

PDFWAC 296-806-40518

Make sure flanges are in good condition.

(1) You must make sure flange bearing surfaces are in good condition.
(2) You must replace or remachine a flange with a mounting surface that has any of the following problems:
(a) Warped.
(b) Burred on the bearing surface.
(c) Excessively worn (thickness or diameter).
(d) Out of true.
Flanges that are refaced or trued need to satisfy minimum dimension requirements specified in Safety Requirements for the Use, Care and Protection of Abrasive Wheels, ANSI B7.1-2000.
[Statutory Authority: RCW 49.17.010, 49.17.040, 49.17.050, 49.17.060. WSR 15-24-102, § 296-806-40518, filed 12/1/15, effective 1/5/16; WSR 04-14-028, § 296-806-40518, filed 6/29/04, effective 1/1/05.]
Site Contents
Selected content listed in alphabetical order under each group