HTML has links - PDF has Authentication
296-150R-0830  <<  296-150R-0840 >>   296-150R-0850

PDFWAC 296-150R-0840

What is required for comprehensive design plan approval for self-certification?

(1) If you are a new manufacturer applying for self-certification:
(a) You must send us two sets of comprehensive design plans (do not send originals) for approval. Design plans must be accompanied by the appropriate fees. (See WAC 296-150R-3000.)
(b) Your comprehensive design plan must indicate compliance with the appropriate ANSI standards in the following plans and drawings:
(i) Floor plans relating to fire and life safety, electrical, plumbing, liquefied petroleum (LP) and/or natural gas systems and appliances, and air conditioning systems, if applicable to the plan of each vehicle.
(ii) Plumbing line drawings which describe the size, length and location of gas piping lines, liquid and body waste lines, liquid and body waste tanks, and potable water tanks.
(iii) Electrical drawings.
We will provide you with a check list with detailed requirements for each type of plan upon request.
(c) Current comprehensive design plans must be available at each manufacturing location.
(2) If you are a state-plan approved manufacturer applying for self-certification, you must have approved comprehensive design plans on file with us and at each manufacturing location.
[Statutory Authority: RCW 43.22.340, [43.22.]355, [43.22.]360, [43.22.]432, [43.22.]440 and [43.22.]480. WSR 96-21-146, ยง 296-150R-0840, filed 10/23/96, effective 11/25/96.]
Site Contents
Selected content listed in alphabetical order under each group