Monitoring requirements.
Each mill shall conduct routine monitoring of emissions in accordance with a program that has been approved by ecology. Results of the monitoring shall be reported monthly within fifteen days of the end of each calendar month, except that source testing results shall be submitted within sixty days of completion of each source testing. All reports shall include data as follows:
(1) Particulate: The results of particulate measurements made on each source during the month.
(2) TRS:
(a) The average TRS concentration expressed in units of the standard for each recovery furnace and lime kiln stack.
(b) The date, time and concentration of TRS for each TRS emissions violation and the total numbers of hours that exceed the standard.
(3) Opacity or other continuous monitor:
(a) The date and time of opacity in excess of the standard.
(b) If equipment for continuous monitoring of opacity is not available, continuous monitoring of operating parameters may be required by a regulatory order as an alternate. If an alternate is approved, the date and time of each occurrence in excess of the regulatory order must be reported.
(4) Production: The average daily production of air-dried unbleached pulp.
(5) Other data: Each kraft mill shall furnish, upon request of ecology, such other pertinent data required to evaluate the mill's emissions or emission control program.
[Statutory Authority: Chapter
70.94 RCW and RCW
70.94.395. WSR 19-10-028 (Order 18-03), § 173-405-072, filed 4/23/19, effective 5/24/19. Statutory Authority: Chapter
70.94 RCW. WSR 91-05-064 (Order 90-06), § 173-405-072, filed 2/19/91, effective 3/22/91. Statutory Authority: RCW
70.94.331 and
70.94.395. WSR 80-11-060 (Order DE 80-15), § 173-405-072, filed 8/20/80.]